Energy Performance Degradation and Thermodynamic Analysis of A Centrifugal Gas Compressor

Authors

  • Mukhtiar Ali Shar Mechanical Engineering Department, The University of Larkano, Larkana, Pakistan Author https://orcid.org/0000-0003-3131-6385
  • Tarique Ahmed Memon Mechanical Engineering Department, The University of Larkano, Larkana, Pakistan Author
  • Zeeshan Qadir Memon Mechanical Engineering Department, The University of Larkano, Larkana, Pakistan Author

DOI:

https://doi.org/10.52584/QRJ.2401.02

Keywords:

OEM (Original equipment manufacturer), MMSCFD (Million standard cubic gas per day), Performance Degradation (PD), Energy Efficiency (EE), Condition Monitoring (CM)

Abstract

Centrifugal gas compressors are the most energy-consuming rotating assets of the gas industry. Continuous operations under various performance conditions lead to energy performance degradation and thermodynamic inefficiency in centrifugal gas compressors (CC). Existing studies have only covered surge prediction, conventional faults, and performance monitoring. However, limited attention has been given to the integration of energy performance degradation and thermodynamic analysis to identify degradation patterns of various performance parameters such as power consumption, shaft speed, volume flow, polytropic head, and polytropic efficiency, which impact the reliability and energy cost of CC. The real-time performance results for LP (1st stage) and HP (2nd stage) CC operating at full load capacity during peak and off-peak demand. The Findings indicate that the compressor is running in off-design conditions, which need maintenance to bring it back to its design conditions. A large portion of the compressed gas is bypassed, which will result in high energy waste, reduced reliability, and increased risk of downtime. Additionally, results showed that the LP (1st stage) consumes 6992.70 kWh of energy, while the HP (2nd stage) consumes 9818.44 kWh of energy, when the compressor runs at full load capacity. Performance maps demonstrated that ASV aggressively opened at 80% in HP and 70% in LP CC to prevent the compressor from surging while operating at full load at 8950 rpm with a 10% surge control line.

Downloads

Published

2026-06-30